Feb 13, 2020 · Meaning, EIGRP stub routers are designed for very small branch office routers or for edges of the network. By setting a router as a stub, it's neighbours will then suppress …

If a specific address on the network is used, in conjunction with the wildcard mask, Cisco IOS software performs a logical AND operation to determine the network that will be enabled for …

RTO, (Retransmision Timeout), this is the period of time the router waits before retransmitting a packet that has already been sent over a connection-oriented protocol. The formulas for the …

As a side note, you don't need to clear the neighbor adjacency since with EIGRP, an automatic adjacency flap is necessary whenever a change resulting to the modification of routing …

EIGRP requires that to be done manually by using stub routers or summary addresses. This can break the topology because it will actually filter routes from the topology table - OSPF will …

Here's the problem, if i use deny any host, it will work but if R2 is attached to another router, the route won't be send to that router as well. I can also go to R3 and config route filtering with …

The "PEER-TERMINATION received" messages tells us that it is the EIGRP peer router that is resetting the connection, possibly because it doesn't receive the EIGRP Hellos within the hold …

I don't think there is a way to show your neighbors hello and hold timers in IOS. You have to issue the show ip eigrp neighbors command repeatedly and kind of deduce what the hold timer is …

EIGRP is going to redistribute what R2 has in its routing table and according to your configs you have a static route default route configured, plus you are redistributing that route int EIGRP. If …

R17# also showing EIGRP neighbors from spoke side give [Q Cnt] value 1 R16#show ip eigrp neighbors EIGRP-IPv4 Neighbors for AS (123) H Address Interface Hold Uptime SRTT RTO Q …